Train with the Most Accurate
Power Meter in the World

Eliminate the Guesswork & Achieve Your Personal Best

Join the ranks of the world’s leading cyclists to take your training to the next level with InfoCrank’s cutting-edge power meter technology.

✅ Virtually error-free dual-leg power data on demand

✅ No data drift

✅ Certified accurate

 

IC2 Power Meter Verve Infocrank
IC2 2024 4
IC2 2024 5
Storey Racing and Infocrank Cycling Power Meter
IC2 2024 6
IC2 2024 7

Designed to address all your needs

Pace Yourself Correctly when Climbing Hills

“I moved to a hilly area from a flat area and climbing was my kryptonite. The power meter really helped, it allows me to pace better when climbing hills and also train with total specificity.”

Get Quality and Accurate Data when Training

“Structured training with a power meter is a game changer. If you`re trying to improve a metric, you better have an accurate way to measure the metric. Otherwise, any perceived gains get lost in uncertainty of the measurement.”

Make Your Training more Time-Efficient and Effective

“In the off-season, parts of spring and fall, I have much less time than most people in my club, to ride. A power meter allows me to take that limited time and spend it in a way where I can improve more efficiently. Otherwise I spend the summer getting into shape to catch up.”

InfoCrank Features

IC2 2024 8
Data sampling torque every four milliseconds on each crank.
Immune to temperature changes.
Measures left and right legs independently.
Accurate at all pedal speeds.
Accurate at all levels of power or torque.
No data drift.
Factory calibrated for torque and crank angle. No user adjustments needed.
BlueTooth compatible for standard power meter and power vectors.
Lightweight, stiff aero design.
Battery life dependent on type of use, but over 200 hours*.
Easy to install and operate.
Data sampling torque every
four milliseconds on each crank.
Immune to temperature changes.

Measures left and right
legs independently.

Accurate at all pedal speeds.

Accurate at all levels
of power or torque.

IC2 2024 8
Easy to install and operate.
Battery life dependent on type of use,
but over 200 hours*.
Lightweight, stiff aero design.
BlueTooth compatible for standard
power meter and power vectors.
Factory calibrated for torque and crank angle.
No user adjustments needed.

No data drift.

InfoCrank IC2 Road & Gravel

A$ 1 743.61 incl. tax

  • Totally re-imagined based on the successful InfoCrank Generation 1 power meter
  • Aero shaped crank arm
  • Strengthen and stiffened crank arms for great power transmission
  • Super strong 24mm steel spindle
  • Parallel splines for perfect fit to your bike
  • Can be fitted to all bikes that can fit Shimano™ cranks
  • Inbuilt spine and ribs to resist twisting
  • Available standard in most lengths
  • Weight of crank and spider xxx gms
  • Manufactured from AL6061T6
  • Matt black finish
  • Factory calibrated for force and crank angle
  • CR 2032 battery provided
  • BLE wireless transmission for excellent information transfer
  • Force (torque) sampling rate exceeds 200 per second
  • Crank angle sampling exceeds 100 times per second
  • Compatible with modern bike computers that can receive BLE Bike Power protocol (list in FAQ’s)
  • Backwards compatible with BLE4 receivers
  • Compatible with indoor cycling programmes that pair with BLE
  • Uploads information to receivers every pedal stroke regardless of speed of cadence in BLE Bike Power mode
  • (coming) Uploads to True North – the Verve app – using the BLE Vector protocol at high speed
SKU: IC2-2-0000 Category:

Let us know your desired crank fit and crank length, your name and email address and we will let you know immediately when the brand new IC2 InfoCrank power meter is available for purchase here.

Product Enquiry: IC2 2024

6 + 6 =

Key Specifications

Compatibility - What type of bikes can it fit?

Normal racing or road bike 2x
Gravel or road bike 1x
Track bike

In Development - What is coming?

ANT+ when modern SDK is released
4-arm MTB/BMX Spider

Bottom Bracket - What diameter is the spindle?

24mm steel – same as Shimano®
Bottom Brackets are widely available to fit your bike and 24mm standard spindles.
Order separately if needed.

Crank Arms - What are they made of?

AL6061T6 Alloy cranks are standard or custom cranks can be produced in AL7076T6 or 3D printed Titanium.

Crank Arms - What lengths are available?

For standard cranks the lengths are: 
165mm
170mm
172.5mm
175mm

155mm, 160mm, 177.5mm & 180mm cranks are made to order with surcharge.

Customer cranks available in any length.

Chainrings - What Chainring choices come with the IC2?

Standard choices are: 54/42, 53/39, 52/36, 50/34, 48/33
Maximum outer ring is 58 – min is 42.
Maximum inner ring is 44 – min is 33.
Recommended gap is no more than 16 teeth.
Non standard choices available including non-circular ring sets.

1x Rings available from 44 down to 38 tooth – narrow/wide.

All sets suit Shimano 11/12 groups.

Check compatibility on each set.

Enviromental - What is the water ingress protection level?

IPX7 standard

Enviromental - Operating humidity

0 – 100%

This means that the cranks can be operated on land whether the air is dry or it is raining.

Battery - What batteries are used in IC2?

CR2032 batteries widely available at most stores and supermarkets globally.

Battery - What is the expected battery life?

Over 200 hours of operations are expected. The deviation from individual batteries is large – individual brands have not been tested.

See FAQ on battery usage and testing.

Software updates - How often are Software and Firmware updates expected?

Initially, there may be some updates to fix notified bugs or upgrade the systems.
However, Verve has a policy of producing products that do not require regular updating.

User maintenance - What can the user see and do with the IC2?

The user is limited to changing the batteries – operating the battery compartment. There are no user accessible parts to IC2.

Wireless - Does IC2 support the legacy ANT+ system?

It is planned to implement ANT+ in IC2 when the updated SDK is released. It was expected in 2022.

Wireless - What is the primary wireless system used by the cranks?

A Bluetooth Low Energy (BLE 5.4) Microprocessor is onboard your IC2. This chip is backwards compatible down to BLE4 devices.

Ranges of operation - Torque measurement

There is no limit to the level of torque that can be accurately measured. However, the standard cranks are only tested (for metal fatigue) for maximum occassional torque of about 250nm. Stronger custom cranks are tested to significantly higher levels. The torque accuracy remains the same at all levels. Both positive and negative torque is measured.

Ranges of operation - Power (Watts) range

All Watts can be calculated.

Ranges of operation - Cadence

All cadence levels are measured.

Ranges of operation - Crank angle and position

It is expected (TBC) that each 2 deg of angle will be measured. The position is likely to be the same. Software to read this metric is in development.

Accuracy - How accurate are the measurements from IC2?

Torque – 0.2Nm
Cadence – error free
Crank Angle – accurate to 2 degrees

Accuracy - How accurate are the watts calculated?

Watts are calculated and available to your bike computer each full crank rotation. The accuracy of each number shown is dependent on the cadence. At 60rpm, the accuracy of the watts shown will be to 0.2% of true and at 120rpm the accuracy would be within 0.4% of true. Most bike computers only show full watts numbers (no decimal points) so in practice the watts are always correct and rounded up or down.

Certification

The independent test certificate is here.

Other - What is the Q factor?

Track Crank 136.3mm
Road Crank 143mm

Other - What is the Q factor?

Track Crank 136.3mm
Road Crank 143mm

Bike Computers

Tested and successful on the latest Garmin Edge Series.

Reviews

IC2 2024 10

Neill Delahaye
Cycling Ireland High-Performance Coach

“Power is an integral metric we use in the process to assess and progress our high-performance squad riders. InfoCrank’s accuracy and consistency is second to none and gives us utmost confidence in knowing the numbers we see, on both Track and Road, are comparable, accurate and therefore reliable. Having the capacity to measure left-right balance gives an additional dimension of insight which is very valuable in optimising individual efficiency and performance capacity.”

IC2 2024 11

Richard Wooles
UCI World Class Centre Coach

“For most of the riders training and racing with the under 23 road team, it’s the first time that they learn to train with power. Our first goal is to teach them about what the numbers mean and how they can use the power meter to help them improve. One of the biggest advantages to using an InfoCrank power meter is that it removes the guesswork and helps them see that the work they put in is helping them turn into a better cyclist, with structured training plans and efforts. The next big thing is for them is to learn what type of rider they are and how to look at their strengths and weaknesses and work with them. One of the last points is motivation, it’s great to see the numbers moving the right way and when they don’t we work with them to figure out why.”

IC2 2024 12

Rhys Howell
Team Manager of Canyon ZCC

“I spent a long time researching power meter products before deciding that InfoCrank was the right choice for us. Unlike all other cycling disciplines where the data is secondary; often utilised only after the race, the opposite is true of eRacing where the data is the race. So I had two criteria: I wanted the most accurate product I could find and I wanted the most bullet-proof product that couldn’t suffer from miscalibration. I firmly believe we’ve found that product and are excited to be working closely with Verve Cycling, both with their hardware and software, to help make Canyon ZCC the most accurate team in eRacing.”

IC2 2024 13

Brad Hall
Director of Veris Racing

“Verve Cycling has produced the best power meter in the world in the Infocrank, which is sold to the best institutions and high-performance programmes in the world. Combined with Verve Cycling’s unwavering ethical focus in delivering accuracy we can work with athletes from around the world remotely and know exactly what they are doing and how they are doing it at any given moment. This would simply not be possible with alternate power meter manufacturers.”

IC2 2024 8

Frequently Asked Questions

Which batteries does the InfoCrank IC2 power meter use?

CR2032 Lithium coin cell batteries – one in each crank.

How many hours of battery life should I expect?
You can expect at least 500 hours of operational use before needing to replace batteries.
How do I install the batteries into the IC2?
The battery cap on the front of the cranks pops open when pressure is applied. Batteries (positioned with the flat side down) should be slipped into the slot sideways. To close the cap, apply enough pressure to have the cap return to its original position.
Will the IC2 fit my bike?
The IC2 has a 24mm spindle which fits all standard 24mm road bottom brackets, so probably yes! Please contact us if you’d like to check with one of our experts.
What is the warranty period on my IC2?
The warranty period is two years from purchase, on materials and workmanship.

About us

At Verve, we custom design, build and test to ensure that our products are accurate, reliable, stable and durable, but first and foremost they are measurement tools. By controlling the design, specification and manufacturing processes, we ensure the quality of the data that is produced.

Having this accurate data can make sense of all the other inputs and variables, so we work to bring this to our customers in numbers, graphs, charts and displays (via free and paid Apps) that enable the basis for diagnosis and comparison that can lead to improvement.

Verve Cycling Infocrank Power Meter for Cyclists
0
    Your Cart
    Your cart is emptyReturn to Shop